10月20日至22日，第十四届北京国际水处理展览会于北京国家会议中心盛大举行。精诚时代2H150以高精度、高均匀、高稳定的制造实力，展示了在水处理膜装备领域的最新成果。
From October 20 to 22, the 14th Beijing International Water Treatment Exhibition was held at the China National Convention Center (Beijing). At booth 2H150, JCTIMES Group showcased its latest advances in water-treatment membrane production equipment, demonstrating manufacturing capabilities distinguished by high precision, high uniformity, and long-term stability.
本次展出的三款水处理涂布模头，均应用于水处理膜生产线的涂布环节，服务于超滤（UF）、纳滤（NF）、反渗透（RO）等膜材料制备。针对水处理膜的不同浆料特性和流变条件，模头在设计阶段就进行了多维度的结构优化：
The three water-treatment coating dies on display are used in the coating stage of water-treatment membrane production lines, serving the preparation of ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO) membranes. To accommodate differing slurry chemistries and rheological conditions, each die was multi-dimensionally optimized at the design stage.
• 采用高均匀流道系统，确保流体在整个幅宽内稳定分布；
High-uniformity flow-channel system ensures stable fluid distribution across the entire coating width.
• 配备独立控温腔体结构，实现温度场均衡控制；
Independent temperature-control chambers provide balanced thermal-field regulation.
• 通过可调式出料间隙设计，精确调节膜层厚度，适应多种浆料体系。
Adjustable discharge-gap design enables precise control of coating-layer thickness, adapting to a wide range of slurry systems.
这套系统化设计，使模头在保持厚度一致性与浆料稳定性的同时，大幅提升了生产效率与良品率，为水处理膜制造提供了更具确定性的装备支撑。
With its integrated, system-level design, the coating die maintains cross-web thickness uniformity and slurry stability while significantly boosting production efficiency and yield—providing a more deterministic, production-ready equipment platform for water-treatment membrane manufacturing.
为满足水处理膜生产的精密要求，模头在制造过程中采用高精度加工设备与恒温装配工艺，确保在运行中实现±1μm级别的厚度控制与温差均衡。
To meet the stringent precision requirements of water-treatment membrane production, the coating die is built on high-precision machining systems and assembled under temperature-controlled conditions, ensuring ±1μm cross-web thickness control in operation and a balanced thermal profile .
在“双碳”目标与清洁水资源管理日益重要的背景下，水处理行业正向更高效、更精细的方向发展。而在这条产业链中，高精度涂布装备正成为驱动技术跃迁的关键环节。“水处理行业正进入智能化生产的新阶段，装备的精度和稳定性，正在决定整个系统的运行成本与能耗表现。”
Against the backdrop of the dual-carbon goals and the growing importance of clean-water stewardship, the water-treatment sector is moving toward higher efficiency and finer process control. Within this value chain, high-precision coating dies and equipment are becoming the key drivers of technological leapfrogging. “The water-treatment industry is entering a new phase of intelligent production; the precision and stability of equipment now largely determine overall operating costs and energy performance.”
从工业水处理到超纯水制备，从分离膜到涂布设备——
精诚时代正以“精密模头”为切口，为清洁技术提供坚实的底层支撑。我们始终相信，真正的洁净，不止于水，更源于精度。
From industrial water treatment to ultrapure water production, from separation membranes to coating equipment, JCTIMES is using precision die engineering as the entry point to provide a solid technological backbone for clean-tech. We believe true cleanliness is not only about water—it begins with precision.
