For many years, JCTIMES has remained focused on high-quality die technology—advancing from precision manufacturing to intelligent upgrades, and continuously driving die innovation toward greater efficiency, higher accuracy, and enhanced stability.
过去，调机更多依赖经验，很多环节需要操作员反复找正、校准，在不断试错中让设备逐步进入状态。但当产线节奏越来越快、品质要求越来越高、连续生产越来越成为常态，单纯依赖人工经验的调节逻辑，已越来越难满足新的制造要求。
In the past, setup and adjustment relied heavily on operator experience. Many stages required repeated alignment and calibration, with equipment gradually brought into optimal condition through trial and error.
However, as production lines accelerate, quality standards rise, and continuous operation becomes the norm, adjustment methods based solely on human experience are increasingly unable to meet the evolving demands of modern manufacturing.
精诚推出IM System智能精密模头，不仅是一项产品升级，更是精诚在模头智能化方向上的持续探索——让模头调节从经验主导，迈向更高效、更稳定、更智能的系统协同。
JCTIMES introduced the IM System intelligent precision die not merely as a product upgrade, but as part of its ongoing exploration into die intelligence—shifting die adjustment from experience-driven operation toward more efficient, more stable, and more intelligent system-level coordination.
01 更高效的调节逻辑
More Efficient Adjustment Logic
以往上机后，人工反复校准往往不可避免，既消耗时间，也考验经验。IM System新增自动对位能力后，相关调整可更多交由系统完成，让调试更省事，设备进入生产状态的过程也更加顺畅。
In the past, repeated manual calibration after installation was often unavoidable—consuming time and relying heavily on operator experience.
With the addition of automatic alignment capability, IM System enables more of the adjustment process to be handled by the system itself. Commissioning becomes more efficient, and the transition from setup to stable production is smoother and more streamlined.
与此同时，IM System在关键指标上也实现了提升：制品调节精度可达±1%，模唇调节精度达0.01mm，唇口间隙变化响应速度＜10s（相比传统自动化模头在同样工序下大约需要10分钟），这不仅是效率的提升，也为高产出生产线提供了更强支撑。
At the same time, IM System delivers measurable improvements in key performance indicators:
l Product thickness adjustment accuracy up to ±1%
l Die lip adjustment precision of 0.01 mm
l Lip gap response time under 10 seconds (compared with approximately 10 minutes for conventional automated dies under the same process conditions)
This is not merely an efficiency gain—it provides stronger support for high-output production lines requiring fast response and stable control.
02 更智能的工艺优化
More Intelligent Process Optimization
IM System并不满足于“会执行”。它新增的AI自学习能力，让设备在运行过程中能够不断积累工艺数据，分析调节过程，并持续优化工艺逻辑。
IM System is not limited to simply “executing commands.”With its newly integrated AI self-learning capability, the system continuously accumulates process data during operation, analyzes adjustment behavior, and progressively optimizes process logic—enhancing control strategies over time.
某种意义上，这就像是给设备装上了一个会思考的大脑——它不仅会调，而且会学；不仅能够执行，还能不断逼近更优的工艺结果。
In a sense, it is like equipping the equipment with a thinking brain—it not only adjusts, but learns; not only executes, but continuously moves closer to optimal process performance.
03 更顺畅的应用落地
More Seamless Application Deployment
真正的升级，不只是把功能做得更先进，更要让先进的技术更容易走进现场。IM System采用全新安装结构设计，整体结构更加优化，无论是新线配套还是旧线改造，应用起来都比原来更便捷。只有当技术真正具备更顺畅的落地能力，智能化才不只是概念，而能够成为现实生产中的有效增量。
A true upgrade is not only about making functions more advanced—it is about making advanced technology easier to implement on site.
IM System adopts a newly engineered installation structure with an optimized overall layout. Whether integrated into a new production line or retrofitted onto an existing one, deployment is more convenient than before.
Only when technology can be implemented smoothly in real production environments does intelligence move beyond concept and become a tangible, value-creating enhancement.
04 在坚实基础上，再迎升级
Built on a Solid Foundation, Advancing to the Next Upgrade.
这一次，精诚并不止步于已有成果，而是在坚实的基础上再次升级。
双组智能精密板材模头——稳中求进，均匀有道。打破传统模头局限，双组联动、实时响应，让微调与阻流棒实现独立智控、协同工作，高效消除厚度波动，让板材挤出更稳定、更均匀、更智能。这不仅是控制方式的进一步升级，也让精诚的智能化能力迈向更高层级。
This time, JCTIMES does not stop at existing achievements, but advances further on a solid foundation.
The dual-unit intelligent precision sheet die—progressing with stability, mastering uniformity. By breaking through the limitations of conventional dies, its dual-unit coordination and real-time response enable independent intelligent control and collaborative operation between fine adjustment and restrictor bars. Thickness fluctuations are efficiently suppressed, delivering more stable, more uniform, and more intelligent sheet extrusion.
This is not merely an upgrade in control methodology—it marks a further elevation of JCTIMES’ intelligent manufacturing capability to a higher level.
CHINAPLAS 2026
我们始终相信，高品质模头不只意味着制造精度本身，更意味着在运行中依旧能够保持高效、稳定、可控，并不断向更智能的方向演进。
We firmly believe that a high-quality die is defined not only by manufacturing precision, but by its ability to remain efficient, stable, and controllable in operation—while continuously evolving toward greater intelligence.
此次CHINAPLAS 2026，精诚将携IM System智能精密模头亮相现场。期待与行业客户面对面交流，共同探讨模头智能化升级的更多可能，见证模头技术如何再拓技艺边界。
At CHINAPLAS 2026, JCTIMES will present the IM System intelligent precision die on site.
We look forward to meeting industry partners face to face, exploring new possibilities in die intelligence upgrades, and witnessing together how die technology continues to push the boundaries of craftsmanship.
