In June 2025, JCTIMES made a simultaneous appearance at the FCVC International Hydrogen & Fuel Cell Vehicle Congress and the APFE International Adhesive Tape & Functional Film Expo. In response to the new energy industry’s growing demands for efficiency, cost reduction, environmental protection, and intelligent manufacturing, JCTIMES showcased its “high precision, high stability, and high integration” technologies—seamlessly embedded across various application fields. We offer integrated coating solutions that support our customers from material R&D to full-scale production.
APFE 2025｜第二十一届国际胶带与薄膜展
展位号：6T-035
地址：国家会展中心
在APFE展馆是场“轻制造”的精密考验，每一卷高透明、耐刮、服帖的功能膜材背后，藏着一场微米级的工艺考验。
At the APFE exhibition hall, it’s a precision test of “light manufacturing.” Behind every roll of high-transparency, scratch-resistant, and conformable functional film lies a meticulous craftsmanship challenge measured in microns.
如何在大幅宽基材上实现厚度一致、无气泡、无刮痕的热熔胶涂层？如何在不同材质（PET/PE/PP/TPU等）之间实现高附着力+易剥离性的精细平衡？我们为解决这些问题带来一系列产品：
How can we achieve a uniform, bubble-free, and scratch-free hot melt adhesive coating on wide-width substrates? How can we strike the delicate balance between high adhesion and easy release across different materials such as PET, PE, PP, and TPU?
To address these challenges, we present a series of advanced solutions:
线棒无刮痕热熔胶涂布模头：专为高要求电子膜材而设，保障胶层超薄涂布的一致性与可重复性；
Line-Bar No-Scratch Hot Melt Coating Die:Specifically designed for high-spec electronic film applications, this die ensures ultra-thin adhesive layer coating with exceptional consistency and repeatability.
内堵式热熔胶涂布模头：支持大流量稳定输出与细节控制，广泛用于保护膜、封装膜等高洁净场景；
Internal-Blocking Hot Melt Coating Die:Supports high-volume, stable output with precise detail control, widely used in high-cleanliness applications such as protective films and packaging films.
FCVC 2025｜国际氢能与燃料电池汽车大会
展位号：C19
地址：上海汽车会展中心
而在FCVC展馆，焦点从“材料均匀性”转向“性能一致性”与“量产效率”的双重考验：如何把实验室参数转化为量产数据，推动氢能产业链稳定升级。
At the FCVC exhibition hall, the focus shifts from “material uniformity” to the dual challenge of “performance consistency” and “mass production efficiency”: how to translate laboratory parameters into scalable production data, driving the steady advancement of the hydrogen energy industry chain.
GDL气体扩散层涂布模头：控制微米级气孔结构和导电粒子分布，是保障氢气、氧气扩散路径通畅、维持燃料电池稳定输出的技术核心。
GDL (Gas Diffusion Layer) Coating Die: This die precisely controls the micron-scale pore structure and the distribution of conductive particles, which is critical to ensuring smooth diffusion paths for hydrogen and oxygen, thereby maintaining stable output performance of the fuel cell.
双层双闭环涂布模头：关键在于多层功能材料的复合涂布控制。通过双闭环系统实现对浆料流量和模唇间隙的动态精调。
Double-layer Dual Closed-loop Coating Die: This die is key to the composite coating of multi-functional materials. Through a dual closed-loop system, it enables dynamic fine-tuning of slurry flow rate and die lip gap, ensuring precise layer control and high-performance multilayer coating.
从电解水制氢到燃料电池汽车的商业化应用，从电子包装到薄膜复合的产业延展，精诚正在以涂布为技术轴心，链接更多新能源、材料与未来制造的可能性。
From water electrolysis hydrogen production to the commercial application of fuel cell vehicles, and from electronic packaging to film composite industrial extensions, JCTIMES is centering on coating technology to connect more possibilities across new energy, materials, and future manufacturing.
